fbpx

Signage, Promotional And Digital Printing

 

CUSTOM HEAT TRANSFERS

Cut | Position | Press


 

custom heat transfer

 Easily transfer your designs unto numerous types of products including fabric, cardboard, stock paper, ceramic, metal, wood, glass, acrylic, plastic, leather, nylon and lots more. when you purchase our transfer papers.  

Select an Option

* Free instruction manual included in pack

In addition, laserdark can also be used for metal, wood, cork, mdf, book cover. However a cheaper option will be to go for Hard surface paper if you need to transfer on these surfaces.

Use Laserdark in conjuction with metallic foil to get that metallic look

FashionPU Transfer Instruction

Step 1: Set heat press temperature to 150 degrees celsius.

Step 2: Heat press garment for about 10s to remove any moisture

Step 3: Remove protective backing from transfer paper.

Step 4: Place transfer paper on product and press for about 10s using low to medium pressure.

Step 5: Peel while hot.

Step 6: Cover design with parchment paper and press for further 10s using heavy pressure.

UPLOAD YOUR DESIGN >>

 

Laserdark Transfer Instruction

Step 1: Place the transfer media on the product. 

Step 2: Use the heat press settings on the next column to transfer design to product. Peel cold

 

 

oki settings

Step 3: FIXING
• It is important to repress the transfer properly to soften the touch and increase the washability.
• For a Matte Finish use  "parchment paper" and press for 30 seconds with temperature and pressure
as indicated in the TABLE.
• For a Glossy Finish use "Teflon sheet" and press for 30 seconds with temperature and pressure
as indicated in the TABLE.

UPLOAD YOUR DESIGN >>

.

Hard Surface Heat Transfer Instruction

For application such as mugs, it is recommended to further bake the product in a conventional oven for 5 seconds and allow  to cool slowly before being removed. Recommend mugs for this application in terms of durability are matte mugs followed by laser mugs then sublimation mugs as the least durable. 

UPLOAD YOUR DESIGN >>


SUPPORTED FILE TYPES

file types

 

CUSTOM HEAT TRANSFERS

Cut | Position | Press


 

custom heat transfer

 Easily transfer your designs unto numerous types of products including fabric, cardboard, stock paper, ceramic, metal, wood, glass, acrylic, plastic, leather, nylon and lots more. when you purchase our transfer papers.  

Select An Option

Transfer Instruction

Step 1: Set heat press temperature to 150 degrees celsius.

Step 2: Heat press garment for about 10s to remove any moisture

Step 3: Remove protective backing from transfer paper.

Step 4: Place transfer paper on product and press for about 10s using low to medium pressure.

Step 5: Peel while hot.

Step 6: Cover design with parchment paper and press for further 10s using heavy pressure.

UPLOAD YOUR DESIGN >>


In addition, laser dark can also be used for metal, wood, cork, mdf, book cover. However a cheaper option will be to go for Hard surface paper if you need to transfer on these surfaces.

Transfer Instruction

Step 1: Place the transfer media on the product.
 Step 2: Use the heat press settings below to transfer design to product. Peel cold

oki settings

Step 3: FIXING
• It is important to repress the transfer properly to soften the touch and increase the washability.
• For a Matte Finish use  "parchment paper" and press for 30 seconds with temperature and pressure
as indicated in the TABLE.
• For a Glossy Finish use "Teflon sheet" and press for 30 seconds with temperature and pressure
as indicated in the TABLE.

UPLOAD YOUR DESIGN >>


 

Transfer Instruction

Unsaved Preview Document

For application such as mugs, it is recommended to further bake the product in a conventional oven for 5 seconds and allow  to cool slowly before being removed. Recommend mugs for this application in terms of durability are matte mugs followed by laser mugs then sublimation mugs as the least durable. 

UPLOAD YOUR DESIGN >>


SUPPORTED FILE TYPES

file types